You have probably been geared up and inspired to install a HVAC and do it yourself after watching a good deal of DIY YouTube videos. It is not a question of your dexterity with handling tools this time. No doubt, you’ve gotten your hands oiled up and dirty a good number of times trying to change the oil filter in your Wagon.
You’re a know-it-all and can and have even fixed your broken TV and ceiling fan times and over. From your wealth of experience, you may have gathered that it is well worth it to fix some of these home appliances yourself rather than wait on some Never-Do-Well technicians whose charges are always unfriendly. Yes, you’ve gained mastery when it comes to repairing and this is always a thing to commend.
However, when it comes to your HVAC system, it is that one home appliance that should simply be labelled OUT-OF-REACH, that’s why you should use a company like callthegeneral.com/hvac-installation/ for easy installation.
HVAC System is a Different Story
The technology employed in the furnace and air conditioner units of today has been wired mostly by robots incorporating the latest sciences for better performance. This has made them extremely difficult to understand except, of course, you have been thoroughly formally trained for that.
The best you can do on your HVAC system is to replace the air filters as often as monthly but then — that’s it. You basically can’t and shouldn’t even try to lift a pin to attempt any other HVAC repair procedures. As mentioned by the folks at https://www.billyaircon.com.sg/, these repair tasks are to be left to qualified service professionals. They know all the ins and outs of an HVAC system and are highly trained to do the tasks.
Before you take that screwdriver and the rest of your toolbox and go panelling into your HVAC, take a good look at these reasons showing why you should go no further.
Professional Training and Work Tools
To be an HVAC professional, you would definitely be training for years formally and learning as an apprentice before you would ever be considered to be certified to repair air conditioning systems and other HVAC equipment.
To do any form of HVAC repair, there are certain tools and intelligent devices including safety wear like Nitrex Gloves, goggles, ear protection, and nasal respiration protection that you must own and that you must have always at hand as an HVAC technician.
Thinking Safety
You must be well aware already that all HVAC systems including air conditioners and heat pumps are strictly electricity and chemical-based. This means that if you at any time cross the wrong wires, you may be well in danger of electrocution.
Also, the refrigerant chemicals and solutions used in HVAC systems are extremely poisonous to any part of the body and can cause a fatality when they are not handled correctly.
Increased Costs
The primary reason most people go DIY is to save costs. However, when you think you’re doing just fine only to end up making a very costly and irreversible mistake, what do you do?
When your HVAC system is being upgraded or installed by a professional, he would rarely make mistakes if ever, and even if he does make mistakes, you wouldn’t be responsible for the replacement of any part or system. He would pay the cost of fixing it. It is obvious it is far cheaper for you to use a professional in this field and save yourself from unnecessary and unplanned higher costs.
You’ll Void Your Warranty
Most of all electrical goods come with a warranty. While some are as low as 1 year, others can be as high as 5 years. However, a warranty can easily be voided when a failed repair attempt is carried out on the HVAC by a non-professional.
Regular maintenance checks and planned repairs by an HVAC professional are necessary to ensure that a warranty stays valid.
Where a mistake has occurred, you will lose the entire warranty and the ability to repair any fault with the HVAC at no cost
The Following Things Can Be Done By You
- Change your air filters frequently. It is advisable to check them monthly and change them once in three months.
- If you notice a reduced flow of air or irregular temperature, you can confirm your filter first of all and later make sure the vents are free and clear of any foreign body.
- Take away every debris from the outside unit to prevent it from getting dirt-filled and slow.
- In case your HVAC suddenly loses power, confirm the power switch hasn’t been touched.
- When cooling isn’t as fast as needed, confirm the thermostat and confirm that the registers and vents are open.
There are certain things that you can DIY, but installing an HVAC system is not one of them. You need to hire a trained professional to do this task to avoid the unnecessary consequences listed above.
